TL;DR The November 2026 extensions run only to 9-10 January 2027, so treat them as a booking window rather than a settlement. Fix prices on volume you can enter before 9 January 2027, and keep later volume on a floating duty clause tied to the rate on your entry summary, not the date an announcement was made.
The short answer: fix prices on the volume you can physically enter before 9 January 2027, and leave everything landing after that date on a floating duty clause. The extensions announced on 9 and 10 November 2026 are a two-month bridge, not a settlement. They move the decision date, not the decision.
This plan covers what expires in January, how to split a 12-month book into fixed and floating volume, and which dates to work backwards from.
What actually changed on 9 and 10 November 2026?
USTR extended all 178 current Section 301 exclusions, covering goods entered for consumption or withdrawn from warehouse from 10 November 2026 through 11:59 p.m. Eastern on 9 January 2027. The 178 break down as 164 product exclusions under HTSUS 9903.88.69 and 14 solar manufacturing equipment exclusions under 9903.88.70. The notice was published in the Federal Register on 10 November 2026, and coverage is continuous: entries from 10 November sit inside the new window, not between two of them.
China's State Council Tariff Commission extended its suspension of the 24% additional tariff on US goods to 10 January 2027, leaving the 10% tariff in place, and kept its export-control waivers on certain critical minerals and its suspension of port fees on US-linked vessels running to the same date. That last item is a supply-continuity clause rather than a tariff line: it decides whether a component ships in December or waits for a licence review.
Should I lock prices now or wait for tariffs to fall?
Neither, as a blanket policy. Price the calendar, not the headline.
Waiting assumes a direction the record does not support. The 12.5% Section 301 action on forced labour took effect on 24 July 2026, replacing the stop-gap global tariff that followed the Supreme Court's February 2026 ruling against the IEEPA tariffs. A second Section 301 investigation, into excess capacity across 60 economies, opened in March 2026 and is still open. China Briefing's 23 July 2026 analysis reads China's position as accepting replacement duties while the combined total stays within the 20% agreed in November 2025, which leaves room for up to 7.5% under that investigation before the ceiling is tested. Plan for duty at roughly today's level.
Locking everything is the mirror error. A 12-month fixed price on goods entering in July 2027 prices a duty nobody can see, and that uncertainty returns as a risk premium whether or not the rate moves.
How do I split 12 months into fixed and floating volume?
From entry dates, not purchase-order dates. An exclusion is claimed on the entry, so the entry date alone decides whether the January window applies.
For each SKU, work forward from a slot confirmed in writing with line and lot named: ex-factory date, transit and port dwell from your forwarder's quote for that lane this quarter, the broker's filing date (often not the arrival date), and one working day of buffer.
An entry on or before 8 January 2027 goes in the fixed bucket. Anything later goes floating. Then test capacity: if the factory cannot build and hand over that volume before mid-December, it is floating volume whatever the contract says.
Two eligibility traps. An exclusion applies only where the ten-digit statistical reporting number and the product description in the U.S. notes to Chapter 99 both match, so a code match alone is not eligibility. And an exclusion removes the list duty only: the 12.5% action, Section 232 duties where they apply, and the ordinary most-favoured-nation rate, around 3.3% on average, still apply. Budget the total from the entry summary, not the excluded line.
Which documents hold that split together?
- Entry summaries for the last six months, showing the Chapter 99 subheadings actually filed.
- A written per-line rate confirmation from your broker for entries either side of 9 January 2027.
- The supplier's classification and origin statement: ten-digit code, factory address, and process steps performed there.
- The forwarder's written ETA and planned filing date for every January-landing shipment.
- The Federal Register annex text for each exclusion you rely on.
If any is missing, the fixed bucket is an assumption with a price attached.
What should the contract say about a duty change?
Five clauses: a trigger defined by the rate on the entry summary at time of entry, not the date of an announcement; symmetrical pass-through, so the price falls when the rate falls; a re-quote window of, say, five business days; a cap per shipment or quarter; and a named party handling post-summary corrections and protests, with a named refund recipient.
Add a price validity date matching the January window. A quotation with no expiry is one the supplier can reprice at will.
What if the deadline slips again?
It might. Both governments have extended rather than settled at every previous step, and Trump and Xi were due to meet at the APEC summit in Shenzhen on 18 and 19 November 2026. Treat summit language as unconfirmed until a Federal Register notice appears.
Model two states, relief continuing past 9 January and relief lapsing, through one landed-cost sheet per unit built from the duty lines on your own entries. Then answer three questions: which SKUs fall below your margin floor if the list duty returns, what price change you need and by what date, and which orders you would pull forward if the window closes.
The 60-day checklist
- By 21 November: export the 12-month purchase-order book with an entry date against every line, and tag each line fixed or floating.
- By 25 November: get written per-line rate confirmations from your broker for entries before and after 9 January 2027.
- By 1 December: agree the fixed and floating split with each supplier in writing, including quantities and ship-by dates.
- By 5 December: for every January-landing shipment, confirm vessel ETA and filing date, and re-cost anything that cannot be entered by 8 January at the full list rate.
- By 15 December: publish the price list for floating volume with the duty formula attached.
- Every Monday until January: check the Federal Register for a new Section 301 exclusion notice and log the date you checked.
- 9 January 2027: last day for entries covered by the current exclusions. 10 January 2027: expiry of China's extended suspensions.
The buyers who lose money here are rarely the ones who misread the policy. They are the ones who signed a fixed price for goods that entered two weeks after a deadline they had already read about.
FAQ
Do the November 2026 extensions cover goods that enter after 9 January 2027?
No. The USTR notice covers goods entered for consumption, or withdrawn from warehouse for consumption, from 10 November 2026 through 11:59 p.m. Eastern on 9 January 2027. Entries after that date fall outside the extension unless a further notice is published, so cost them at the full list rate.
Should I lock a 12-month price with my supplier right now?
Only for the volume you can produce, ship and enter before 9 January 2027. Everything entering after that date should carry a floating duty clause with a defined formula, a re-quote window and a cap, so neither side absorbs an unbounded move.
Does a Section 301 exclusion remove all duty on the shipment?
No. An exclusion removes the list duty only. The ordinary most-favoured-nation rate, the 12.5% forced-labour action effective 24 July 2026, Section 232 duties where they apply, and merchandise processing fees still apply, so quote the total on the entry summary rather than the excluded line.
Which date decides whether my shipment is covered?
The entry date, meaning the date the goods are entered for consumption or withdrawn from warehouse for consumption. Purchase-order dates, invoice dates and vessel departure dates do not decide eligibility, which is why plans built on PO dates go wrong in January.
What should I check every week between now and January?
The Federal Register for any new Section 301 exclusion notice, and your broker's written rate confirmation per ten-digit HTS line. Log the date you checked, because a verbal assurance from a forwarder is not evidence when the entry is filed.
Sources
- Reuters — China extends suspension of 24% tariff on US imports by two months — https://www.reuters.com/world/asia-pacific/china-extends-suspension-24-tariff-us-imports-two-months-2026-11-09/ (2026-11-09)
- KPMG — USTR extends Section 301 product exclusions for certain imports from China — https://kpmg.com/us/en/taxnewsflash/news/2026/11/ustr-section-301-china-product-exclusions.html (2026-11-09)
- Coppersmith — Section 301 tariff exclusions extended to January 9, 2027 — https://www.coppersmith.com/section-301-tariff-exclusions-extended-january-2027/ (2026-11-11)
- China Briefing — US-China relations in the Trump 2.0 era (timeline, updated 17 November 2026) — https://www.china-briefing.com/news/us-china-relations-in-the-trump-2-0-implications/ (2026-11-17)
- Reuters — How Trump and Xi went from tariff war to trade truce — https://www.reuters.com/business/aerospace-defense/how-trump-xi-went-tariff-war-trade-truce-2026-11-17/ (2026-11-17)